STI 34609 - Manual (Page 2)

Thank you for purchasing the STI Wireless Doorbell Button. Your satisfaction is very important
to us. Please read this manual carefully to get the most from your new product.
Installation Instructions
1. To remove cover, insert screwdriver, or other small
device, at bottom of cover and depress gently.
Rotate until tab disengages (Fig. 1).
2. Insert the battery by placing it under the top
claws and then pushing battery into the bottom
cradle (Fig. 2 and 3).
3. Attach backplate onto mounting surface with two
included #6 – 32” screws (Fig. 4).
4. Snap cover back together (Fig. 4).
5. The Wireless Doorbell Button can now be
enrolled into your 433 MHz Wireless Receiver.
(Refer to receiver instructions for enrollment and
programming.)
FIG. 1
FIG. 2
FIG. 3
FIG. 4
-2- COVER
PLACE TAB INSIDE
COVER INTO SLOT
ON BACKPLATE
AND ROTATE CLOSED
BACKPLATE
WHEN USING ANCHORS, DRILL 3/16 in. DIA HOLES
WHEN USING SCREWS ONLY, DRILL 3/32 in. DIA HOLES
19018 ANCHOR
(2) PROVIDED
1-5/8 in. 1-5/8 in.
A
B
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN
1.02 in.
(26mm)
.735 in.
(19mm)
3.55 in.
(90mm)
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN
COVER
PLACE TAB INSIDE
COVER INTO SLOT
ON BACKPLATE
AND ROTATE CLOSED
BACKPLATE
WHEN USING ANCHORS, DRILL 3/16 in. DIA HOLES
WHEN USING SCREWS ONLY, DRILL 3/32 in. DIA HOLES
19018 ANCHOR
(2) PROVIDED
1-5/8 in. 1-5/8 in.
A
B
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN
1.02 in.
(26mm)
.735 in.
(19mm)
3.55 in.
(90mm)
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN
COVER
PLACE TAB INSIDE
COVER INTO SLOT
ON BACKPLATE
AND ROTATE CLOSED
BACKPLATE
WHEN USING ANCHORS, DRILL 3/16 in. DIA HOLES
WHEN USING SCREWS ONLY, DRILL 3/32 in. DIA HOLES
19018 ANCHOR
(2) PROVIDED
1-5/8 in. 1-5/8 in.
A
B
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN
1.02 in.
(26mm)
.735 in.
(19mm)
3.55 in.
(90mm)
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN
COVER
PLACE TAB INSIDE
COVER INTO SLOT
ON BACKPLATE
AND ROTATE CLOSED
BACKPLATE
WHEN USING ANCHORS, DRILL 3/16 in. DIA HOLES
WHEN USING SCREWS ONLY, DRILL 3/32 in. DIA HOLES
19018 ANCHOR
(2) PROVIDED
1-5/8 in. 1-5/8 in.
A
B
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN
1.02 in.
(26mm)
.735 in.
(19mm)
3.55 in.
(90mm)
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN
COVER
PLACE TAB INSIDE
COVER INTO SLOT
ON BACKPLATE
AND ROTATE CLOSED
BACKPLATE
WHEN USING ANCHORS, DRILL 3/16 in. DIA HOLES
WHEN USING SCREWS ONLY, DRILL 3/32 in. DIA HOLES
19018 ANCHOR
(2) PROVIDED
1-5/8 in. 1-5/8 in.
A
B
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN
1.02 in.
(26mm)
.735 in.
(19mm)
3.55 in.
(90mm)
SET BATTERY IN PLACE AS
SHOWN AND PRESS DOWN