STI 6510 - Manual

INSTALLATION OF STI MINI STOPPER ® SERIES
All specifications and information shown were current as of publication and are subject to change without notice.
6600IS FEB2009
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
TYPICAL SURFACE MOUNT INSTALLATION
TYPICAL FLUSH MOUNT INSTALLATION
VIEW IN DIRECTION OF ARROW A
OPTIONAL: STOPPER SEAL STI-6515
VIEW SHOWING BATTERY REPLACEMENT
REMOVE ADHESIVE BACKING PAPER GASKET
NOT FOR USE WITH UNITS CONTAINING HORN
ALL HORN MODELS SIDE VIEW
ALL MODELS WITHOUT HORN SIDE VIEW
ALL MODELS END VIEW
PRODUCT DIMENSIONS
Electronic warranty form at www.sti-usa.com/wc14
HORN
HOUSING
5 in.(127mm)
5.5 in.(139mm)
FRAME
2.25 in.
(57mm)
2 in.(51mm)
SPACER
SPACER
5.5 in.(139mm)
FRAME
6 in.(152mm)
FRAME
4.12 in.
(104mm)
19031 FRAME LOCK
SUB-65
BREAKABLE SEAL
(5) PROVIDED
FIRE
ALARM
PULL
DOWN
LIFT HERE
ENTER
SPACER
4.75 in.(121mm)
TO INSTALL, DRILL
23/64” HOLE IN
COVER ONLY. INSTALL
BLOCK FROM BACK
SIDE OF FRAME.
TO ACCESS
BATTERY REMOVE
(2) SCREWS
AND LIFT
HOUSING LID
BATTERY - 9 VOLT
PROVIDED
EA135 HORN
SERVICE PIN
TO ACCESS
BATTERY REMOVE
(2) SCREWS
AND LIFT
HOUSING LID
USING TAB
LID NOTCH
ALIGN BATTERY TERMINALS,
PUSH IN TERMINALS AND
ROTATE INTO POSITION.
BE SURE BATTERY TERMINALS
ARE FULLY ENGAGED.
REPLACING HOUSING LID
• PLACE NOTCH OF LID UNDER
HOUSING TAB
• ROTATE LID INTO POSITION
• REPLACE SCREWS
TAB
HOUSING
TAB
SPACER INSERT
(2) PROVIDED
ALLOWS FOR
INSTALLATION WITH
OR WITHOUT
ELECTRICAL CONDUIT.
NOTE: NOT TO BE USED
WITH STI-6535.
CENTER COVER AND FRAME ASSY.
AROUND PULL STATION.
MARK AND DRILL (4) HOLES
.25 in. (6.3mm) DIA.
STI-6004 GASKET
(INNER DIA. USED ON 1/2 in.)
(OUTER DIA. USED ON 3/4 in.)
NOTE: USE WITH STI-6535
STI-6600 HORN MODEL WITHOUT SPACER
STI-6605 HORN MODEL WITH SPACER
STI-6525 WEATHER MODEL WITHOUT HORN
OR SPACER, WITH GASKET
STI-6535 WEATHER MODEL WITHOUT HORN,
WITH SPACER AND GASKETS
STI-6540 WITHOUT HORN WITHOUT SPACER
STI-6545 WITHOUT HORN, WITH SPACER
STI-6500 CLEAR COVER, NO HORN HOUSING
STI-6505 CLEAR COVER, NO HORN HOUSING,
WITH SPACER
STI-6501 GASKET.
STI-6525 (1) PROVIDED
STI-6535 (2) PROVIDED
INSTALL WITH ADHESIVE
BACKING FACING WALL
STI-6531 SPACER (CLEAR)
STI-6531-R (RED)
STI-6531-Y (YELLOW)
STI-6531-B (BLUE)
STI-6531-G (GREEN)
OPTIONAL
OPTIONAL: RECOMMEND THE
USE OF STI-6581 BACKPLATE
TO INSURE PROPER SEALING
19033 ANCHOR
(4) PROVIDED
EXISTING PULL
STATION
FIRE
ALARM
PULL
DOWN
EA135 HORN
DEACTIVATION PIN
NOTE: FOR NORMAL
OPERATION, TO ARM HORN,
REMOVE PIN.
ALARM WILL SOUND,
SHUT COVER.
A
MODELS WITH NO SPACER
(4) 19013 #10 x 1.5 in.
PHILIPS PAN HEAD
MODELS WITH SPACER
(4) 19026 #10 x 3.5 in.
PHILIPS PAN HEAD
03006 FRAME GASKET
INSTALL WITH ADHESIVE
BACKING FACING TOP OF FRAME
VOLUME SELECTOR SWITCH
DETAIL B B
FIRE
ALARM
PULL
DOWN
3.25 in.
(83mm)
6.23 in.
(158mm)
RETIRER LE PAPIER DORSAL DE L’ADHÉSIF
NE PAS UTILISER LE JOINT AVEC LES UNITÉS INTÉGRANT UNE ALARME SONORE