STI 9730 - Manual

INSTALLATION OF STI-9730 WIRE GUARD DAMAGE STOPPER ®
All specifications and information shown were current as of publication and are subject to change without notice.
9730 OCT 2010
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
STI-9621
INSTALLATION INSTRUCTIONS
1. Center and place wire guard over device or product to be protected
and mark all 6 hole locations with pencil or marker.
2. Drill all 6 holes using 1/4” diameter drill 1-1/2” deep.
3. Insert anchors into drilled holes.
4. Place wire guard in position, insert screws and tighten.
MARK AND DRILL
1/4 DIA. HOLE
(6) PLACES
19033 #10 ANCHOR
(6) PROVIDED
19013
#10 x 1-1/2 in. SCREW
(6) PROVIDED
STI-9730
WIRE GUARD
12.41 in.
(315mm)
12.17 in.
(309mm)
14.47 in.
(367mm)
16.25 in.
(413mm)
16.57 in.
(421mm)
EXTERNAL DIMENSIONS
INTERNAL DIMENSIONS
Electronic warranty form at www.sti-usa.com/wc14