STI 9622 - Manual

INSTALLATION OF STI MOTION DETECTOR DAMAGE STOPPER ®
All specifications and information shown were current as of publication and are subject to change without notice.
9618 FEB 2009
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
DRILL (4) .25 in.
6.3mm HOLES
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW
10 x 1.5 in.
(4) PROVIDED
EXISTING
WARNING
APPLIANCE
DEPTH
WIDTH
STI-9618 TOP VIEW
STI-9618 FRONT VIEW
HEIGHT
DEPTH
HEIGHT
WIDTH
STI-9619 TOP VIEW
STI-9619 FRONT VIEW
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW
10 x 1.5 in.
(4) PROVIDED
DRILL (4) 25 in.(6.3mm) HOLES
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW 10 x 1.5
(4) PROVIDED
DRILL (4)
.25 in.
6.3mm HOLES
STI-9620 SIDE VIEW
4.875 in.(124mm)
HEIGHT
DEPTH
STI-9620 END VIEW
WIDTH
3.25 in.(83mm)
DRILL (4)
.25 in.
6.3mm HOLES
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW 10 x 1.5 in.
(4) PROVIDED
STI-9621/9622 SIDE VIEW
DEPTH
STI-9621/9622 END VIEW
HEIGHT WIDTH
P
I
R
D
E
T
E
C
T
O
R
DRILL (4)
.25 in.
6.3mm
HOLES
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW
10 x 1.5 in.
(4) PROVIDED
STI-9618 STI-9619
STI-9621
Model Height Width Depth
STI-9618 4.62 in. (117 mm) 5.37 in. (136 mm) 3.0 in. (76 mm)
STI-9619 7.75 in. (196 mm) 5.37 in. (136 mm) 5.62 in. (142 mm)
STI-9620 6.25 in. (158 mm) 4.0 in. (102 mm) 2.25 in. (57 mm)
STI-9621 7.0 in. (178 mm) 5.75 in. (146 mm) 4.5 in. (114 mm)
STI-9622 8.75 in. (222 mm) 4.0 in. (102 mm) 3.75 in. (95 mm)
INSTALLATION INSTRUCTIONS
1. Center the wire guard over existing motion detector.
2. Mark and drill (4) mounting holes (see pictorial for size).
Lag Bolts - If lag shields and lag bolts are used, make sure anchor is flush with
surface. Position guard, insert lag bolt and tighten. Length of bolt should be
selected to assure full thread engagement in anchor.
3. For installations that require tamperproof fasteners, order SUB 81 stainless steel
screws and part no. 19038 bit.
STI-9620
DRILL (4) .25 in.
6.3mm HOLES
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW
10 x 1.5 in.
(4) PROVIDED
EXISTING
WARNING
APPLIANCE
DEPTH
WIDTH
STI-9618 TOP VIEW
STI-9618 FRONT VIEW
HEIGHT
DEPTH
HEIGHT
WIDTH
STI-9619 TOP VIEW
STI-9619 FRONT VIEW
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW
10 x 1.5 in.
(4) PROVIDED
DRILL (4) 25 in.(6.3mm) HOLES
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW 10 x 1.5
(4) PROVIDED
DRILL (4)
.25 in.
6.3mm HOLES
STI-9620 SIDE VIEW
4.875 in.(124mm)
HEIGHT
DEPTH
STI-9620 END VIEW
WIDTH
3.25 in.(83mm)
DRILL (4)
.25 in.
6.3mm HOLES
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW 10 x 1.5 in.
(4) PROVIDED
STI-9621/9622 SIDE VIEW
DEPTH
STI-9621/9622 END VIEW
HEIGHT WIDTH
P
I
R
D
E
T
E
C
T
O
R
DRILL (4)
.25 in.
6.3mm
HOLES
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW
10 x 1.5 in.
(4) PROVIDED
STI-9621 STI-9622
Electronic warranty form at www.sti-usa.com/wc14