Stewart Audio CVA100-2 - Manual (Page 19)

19
3.4 CobraNet
3.4.1 CobraNet FAQ
Q: How do CobraNet devices communicate on the network? Do they
receive an IP address?
A: CobraNet devices operate without the need for an IP address. Many
configuration applications for CobraNet devices will assign an IP ad-
dress for organizational purposes. However, CobraNet devices operate
using data channels called “bundles”. In order to connect a transmitter
and a receiver in a CobraNet network, both devices simply need to be
set to the same bundle number. There is no need for a DHCP server (a
router for example).
Q: How do I configure the bundles of the CVA100-2?
A: Bundle settings should be configured using Cirrus Logic’s CobraNet
Discovery Utility. Instructions for downloading and operation can be
found in section 3.4.2.
Q: Why is the CobraNet Discovery Utility not detecting any devices?
A: First, ensure that your computer has an IP address. If you are operat-
ing without a DHCP server (ie in a switch-only network) then you will
need to manually set an IP address in the Network Configuration sec-
tion of Windows. Next, go to Tools > Options in the top menu and
make sure the proper network device is selected in the top dropdown.
Q: Can the CVA100-2 transmit the input channels to other CobraNet
devices?
A: Yes, the CVA100-2 is designed to transmit two channels and receive
two channels over CobraNet.