Stuart Turner PH 35 ES B - Manual (Page 3)

- 3 -
Cont ...

Children should be supervised to ensure that they do not play with the
appliance.

This product should not be used for the supply of water to more than
one dwelling (house, apartment, flat).
PRODUCT DESCRIPTION
Electric motor driven pump complete with flow switch, pressure switch, pressure vessel
and electronic control.
Motor
Class ‘F’ insulation, totally enclosed fan ventilated cooling, continuously rated.
All motors are induction type, permanent capacitor, fitted with integral auto resetting
thermal overload protection and comply with BS5000 or IEC 34-1. Enclosure ratings are
given in the technical specification section.
Pump
Close coupled to motor.
PH 35 ES B & PH 45 ES B are of single stage, end suction, peripheral design.
K7-2 is of single stage, end suction, centrifugal design.
Standard pump materials of construction of major wetted parts are as follows:-
Model Body Impeller Shaft Mechanical Seal
PH 35 ES B Brass Brass Stainless Steel Nitrile/Carbon/Ceramic
PH 45 ES B Brass Brass Stainless Steel Nitrile/Carbon/Ceramic
K7-2 Brass Plastic Stainless Steel Nitrile/Carbon/Ceramic