Stuart Turner Jet Pump 45 PS - Manual (Page 11)

- 11 -
6 TECHNICAL SPECIFICATION
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
*Note: Max working pressure is the maximum pressure that can be applied to
the pump internal casing under any installation conditions.
6.11 Noise: The equivalent continuous A-weighted sound pressure level at a distance
of 1 metre from the pump does not exceed 73 dB(A) for Jet 55-45 PS or
76 dB(A) for Jet 80-45 PS.
Model Jet 55-45 PS Jet 80-45 PS
Electrical
Power supply
Volts/phase frequency
230/1/50 230/1/50
Enclosure IPX4 IPX4
Type of motor Induction Induction
Power consumption 640 Watts 925 Watts
Full load current 2.9 Amps 5.2 Amps
Rating Continuous (S1) Continuous (S1)
Max. No Starts per hour 30 30
Mechanical
Min inlet head 1 metres 1 metres
Max inlet head 5 metres 5 metres
Max head (closed valve) 45 metres 42 metres
Max working pressure* 500 kPa (5.0 bar) 470 kPa (4.7 bar)
Max ambient air temperature 40 o C 40 o C
Max water temperature 35 o C 35 o C
Min water temperature 4 o C 4 o C
Cut out flow 1 l/min (approx) 1 l/min (approx)
Cut in pressure 180 kPa (1.8 bar) 180 kPa (1.8 bar)
Vessel charge 200 kPa (2.0 bar) 200 kPa (2.0 bar)
P
ump
Dimensions
Length (max) 537 mm 537 mm
Width (max) 292 mm 292 mm
Height (excluding flexible hoses) 654 mm 654 mm
Weight (excluding accessories) 13.2 Kg 15.7 Kg
Pump Connections: Inlet G 1 Female G 1 Female
Outlet G 1 Female G 1 Female
Materials
Body Stainless Steel Stainless Steel
Shaft Stainless Steel Stainless Steel
Mechanical Seal EPDM/Carbon/ceramic EPDM/Carbon/ceramic
Pump Parts GEPPO GEPPO