MAHLE RTI NTF-515 (Rev A) - Manual (Page 6)

UNPACK & CHECK EQUIPMENT
Ensure that all components were delivered.
Ensure that the compressed air source meets specification:
Oil content of the compressed air is below 0.01mg/m 3 .
Ensure that the compressed air pressure and quality is always as prescribed.
Ensure that the air capacity is sufficient.
CHARGE BATTERY FOR AT LEAST 5 HOURS PRIOR TO FIRST USE.
SAFETY PRECAUTIONS
Warning
Ensure there is sufficient ventilation.
Only feed the NTF-515 with air.
Keep the air feed to the NTF-515 clean and free of vapors of organic solvents and
other contaminants. Do not place the NTF-515 in a room where organic solvent
vapors may be present.
Keep the ambient temperature between 40 and 110 °F. Do not connect hot
compressed air directly from a compressor to the inlet of the NTF-515.
Regular maintenance should be performed on the NTF-515 to ensure proper and
safe operation. Ensure that instructions concerning health and safety are compliant
with local regulations
.
ENVIRONMENTAL ASPECTS
The use and maintenance of the NTF-515 do not include environmental dangers.
Most parts are made of metal and can be disposed of in a manner consistent with
local regulations.
Make sure that instructions concerning health, safety and environment are
compliant with all local regulations.
6