MAHLE RTI RHS900 - Manual (Page 9)

- 3.4 -
Components
C:\RHS Computer Files\Instructions\RHS\GB\642-40\0012B-01.doc 1997.09.11
RHS 900
22)
Low-pressure gauge
23) Automatic process switch/lamp (green): cuts in the automatic
process and lights up when the connection is made.
24)
Evacuation switch/lamp (green): cuts in the evacuation process
and lights up when the connection is made. After completed
evacuation, a vacuum test is carried out automatically. The vacuum
lamps light up to indicate “OK” or “Fault”.
25)
Evacuation timer: Evacuation time can be set between 0 and 60
minutes.
26)
Reset/test switch/lamp (green): cuts in the test process and lights
up when the connection is made.
27)
Mains switch/lamp (white): on/off switch for mains supply to
station; lights up when the connection is made.
28)
Recovery switch/lamp (green): cuts in the recovery process and
lights up when the connection is made.