MAHLE RTI RHS900 - Manual (Page 20)

- 5.6 -
Operating RHS 900
C:\RHS Computer Files\Instructions\RHS\GB\642-40\0012B-01.doc 1997.09.11
RHS 900
Refrigerant charging
-
Before the charging process, check the quantity of refrigerant necessary for
the A/C unit concerned. This information can be found on a nameplate in
the vehicle engine compartment.
-
Press process switch (pos. 20) REFRIGERANT CHARGING.
-
If PAUSE is indicated, push the RESET /0.0 button and following the
STARt-button to accept it.
-
Key in the charging quantity required:
- The value of each numeral can be changed with the arrow-up key.
- Use the arrow-left key to move to the numeral to be changed, then use
the arrow-up key to change the value of that numeral.