MAHLE RTI RHS700 - Manual (Page 11)

- 5.1 -
Test
C:\RHS Computer Files\Instructions\RHS\GB\645-40\0009A-01.doc 1997.03.26
RHS 700
The test function must be performed to check the station.
1. Close both valves on the control panel (pos. 1-2).
2. Connect the high and low-pressure hoses to the A/C unit and open the service
couplings.
3. Switch on the A/C unit and read the pressures on the high and low-pressure
gauges (pos. 3/4). The correct pressures are given in the A/C unit manual.
4. Perform a condition diagnosis in accordance with the supplier’s instructions.
See appendix “Example of trouble shooting in an A/C unit”.