Audiovox CDM 8410 - Manual (Page 31)

Page 56 - Chapter 4 Chapter 4 - Page 57
SETTINGS SETTINGS
KEY
To adjust the keypad tone:
1. Press [MENU] .
2. Adjust the keypad tone using the Navigation Key
or the volume keys on the side of the phone.
3. To save, press [OK].
VOICE CALL
To adjust the earpiece volume:
1. Press [MENU] .
2. Adjust the earpiece volume with the Navigation Key
or the volume keys on the side of the phone.
3. To save, press [OK].
SPEAKER PHONE
To adjust speaker volume:
1. Press [MENU] .
2. Adjust the speaker volume with the Navigation Key
or the volume keys on the side of the phone.
3. To save, press [OK].
ALERT
This feature allows you to select alerts to sound when
the phone performs certain functions. Alerts include:
MINUTE ALERT
To set an alert to sound every minute of a phone call:
1. Press [MENU] .
2. Select “Off” or “On” then press [OK] to save it.
SETTINGS SETTINGS
ROAM ALERT
Sounds an alert when leaving a service area and
entering a roaming service area:
1. Press [MENU] .
2. Select “Off” or “On” then press [OK] to save it.
CONNECT ALERT
To sound an alert to notify you that a call has been
successfully placed:
1. Press [MENU] .
2. Select “Off” or “On” then press [OK] to save it.
FADE ALERT
The alert sounds in standby mode or during a call:
1. Press [MENU] .
2. Select “Off” or “On” then press [OK] to save it.
LOW SIGNAL ALERT
The alert sounds in standby mode or during a call:
1. Press [MENU] .
2. Select “Off” or “On” then press [OK] to save it.
NOTE: The alert sounds in standby mode or during a call.
NOTE: The alert sounds in standby mode or during a call.
8410altel 2003.12.12 12:25 AM Page 58