2 system overview, 2 system overview -2, 2 system overvew – Yokogawa DAQWORX User Manual
Page 8: System, Software requrements, Hardware requrements

1-2
IM WX1-05E
1.2
System Overvew
System
This software can perform data logging when connected with instruments (devices)
meeting the following criteria.
• The ability to perform communications using the Modbus/RTU (serial) or Modbus/TCP
(Ethernet) protocol.
• For serial communications, the ability to operate under a baud rate of 4800, 9600,
19200, or 38400.
• The ability to read registers using one or both of the following two Modus function
codes.
• Function code 03: read holding registers
(register numbers: 40001-49999, 400001-465535)
• Function code 04: read input registers
(register numbers: 30001-39999, 300001-365535)
Software Requrements
Run DAQWORX under any of the following operating systems.
• Windows 2000 Professional SP4
• Windows XP Home Edition SP3
• Windows XP Professional SP3 (excluding Windows XP Professional x64 Editions)
• Windows Vista Home Premium SP2 (excluding the 64-bit editions)
• Windows Vista Business SP2 (excluding the 64-bit editions)
• Windows 7 Home Premium, SP1 (32-bit and 64-bit editions)
• Windows 7 Professional, SP1 (32-bit and 64-bit editions)
The language displayed by the software under different language versions of the OS are
as follows.
OS Language
Software Language
Japanese
Japanese
Other
English
Hardware Requrements
The following hardware are required to use GateMODBUS.
• PC:
A PC that runs one of the OS above, and that meets the
following CPU and memory requirements.
When Usng Wndows 2000 or Wndows XP
Pentium 4, 1.6 GHz or faster Intel x64 or x86 processor;
512MB or more of memory
When Usng Wndows Vsta
Pentium 4, 3 GHz or faster Intel x64 or x86 processor; 2 GB or
more of memory
When Usng Wndows 7
32-bit edition: Intel Pentium 4, 3 GHz or faster x64 or x86
processor; 2 GB or more of memory
64-bit edition: Intel x64 processor that is equivalent to Intel
Pentium 4, 3 GHz or faster; 2 GB or more of memory
• Free disk space:
200 MB or more
• Communication device: An Ethernet (when connecting to DAQLOGGER or Remote
Monitor), or RS-232 port that is recognized by the operating
system. Also required for Ethernet communications with this
software’s Modbus instruments), or RS-232 port
• CD-ROM drive:
Used to install the software
• Peripheral devices:
A mouse supported by the operating system