Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 8)

IM 04L31Q01-04E 5
Communication Period
Set communication cycle between CX and “CX Operator”: click (2) icon in figure 2 or select
“Config” from file menu. Unit for communication cycle is m sec.
Communication period can be set from 1000 ms to 60000 ms.
Note
• When there are large amount of communication data between CX and CX operator, some data cannot be updated
within setting communication period. In that case, set longer period in order to update data within communication
period.
1.6 Displaying the Version Information
To confirm the version of the CX Operator, open the [Help] dialog box.
Procedure
1. On the [Help] menu, click [About CX Operator].
The [About CX Operator] dialog box appears.
2. To close the dialog box, click [OK].