3 cx operator installation and operation flow – Yokogawa Data Acquisition with PID Control CX2000 User Manual

Page 5

IM 04L31Q01-04E

1.3 CX Operator Installation and Operation Flow

CX Operator is provided on a CD-ROM.

Installation procedure

1. Turn on the computer. Windows starts.
2. Insert the CD-ROM into the CD-ROM drive of the computer.
3. The installation program starts automatically. Follow the instructions on the screen to proceed with the installation.

If the installation program does not start automatically when you insert the CDROM into the CD-ROM drive, use the

following procedure to start it.

- In [My Computer], double-click the CD-ROM icon.
- Double-click the setup.exe file in the root directory. Installation starts. Follow the instructions on the screen to

complete the installation.

Note

• Before starting the installation, make sure to exit all resident programs such as anti-virus programs.
• To reinstall the software, first remove it, then reinstall it.
• To remove the software, follow the procedure below.

1. In the [Control Panel], double-click [Add/Remove Programs]. The [Add/Remove Programs Properties] dialog box

appears. From the list, select [CX Operator] to remove it.

2. In Windows Explorer, delete all the files (data files and folders) created after the installation, as well as the folder

where the software was installed.

The CX Operator operation is followed by the order below.

(Set host name, IP address)

Config