Yokogawa Button Operated MV2000 - Manual (Page 18)

1
IM 04L47B01-02EN
Text conversion for the specified range
1. Set cursor A and cursor B.
2. Clicking here displays the
“ASCII Conversion Details” dialog box.
3. Click and select “Blank”
from the list box.
Text data save location with initial settings
Converted text data Example for text conversion data
Y-axis magnification/reduction or movement
When the Y-axis is in free mode, move the cursor,
and when the mouse pointer becomes an arrow,
drag for magnification/reduction.
Magnify/Reduce object range
Move the mouse cursor to any position on the Y-axis and click when it becomes this mark.
When this display is reached, operate the mouse wheel up or down
to magnify or reduce the Y-axis display or click to magnify/reduce
the Y-axis based on the factor display position.
Place the mouse cursor, and when it has
become this mark, drag to move the
Y-axis in vertical direction.
Dragged state State when
moved up
Click here for Y-axis free mode.
Print
Clicking here displays the print settings screen, and print-out is
performed after specification of printer and printing range.
The waveform, the cursor values, and the section
calculation results displayed on the screen are printed.
Example 5 Waveform display change and printing