Yokogawa Button Operated MV2000 - Manual (Page 16)

16
IM 04L47B01-02EN
Example 5 Waveform display change and printing
With waveform display of DAQManager it is possible to perform waveform display in tag
units, to display data with different recording intervals on the same waveform display
screen, or to perform waveform display with specified display range.
Cursor use makes it possible to apply marks and to move the marked information up or
down, to display calculation values for the section specified by the cursors, or to perform
data conversion for the specified section.
Search by tag and waveform display
1. After file import, click here to display the tag list.
2. When data are right-clicked and “Display”
is selected, waveform display is made in tag units.
When data are selected, the tag information is
displayed in the Properties window.
Display of data with different intervals in a single window
1. Waveform display of data with a recording interval of 125 ms.
2. When data with a recording interval of
250 ms are right-clicked and “Additional
display in the active window” is selected,
the waveform is shown as additional
display on the existing waveform display
screen.
Creating marks
1. Click on the waveform screen and arrange the cursors.
2. Clicking here displays the “Append Mark” screen.
Cursor value
3. When [OK] is clicked after input of a
comment, a mark is created at the
cursor position.
Mark title
Mark comment