Yokogawa 414 Batch Controller User Manual
Page 35
Step
Display
Description
Text
Ref
9
CUTOFF
xx.x
The signal Cutoff.
Enter as a % of the Span.
3.3.2
10
F dPt
Number of decimal points with which the Rate is
to be displayed between 0 to 0.00000.
11
t.base
The Timebase with which the Span is entered
must be programmed.
3.2.1
60secs
hours
days
secs
units/min
units/hour
units/day
units/second
12
FILTER
The filter constant for filtering the rate display.
3.2.2
1
to
99
No filtering.
Very heavy filtering
13
TOTCON
A division factor to convert the totals to different
units from those used for rate (ie gallons/min and
barrels).
3.4
1
Rate and totals have the same engineering units.
x.xxxx
Other factors can be programmed between 0.01
and 2000.
14
t.dPt
Number of decimal points with which the
resettable total is displayed between 0 to 0.000.
15
A.dPt
Number of decimal points with which the
Accumulated (non resettable) total is displayed
between 0 to 0.000.
16
ACCESS
Front
No Acc
Enable access to calibration routine via the front
keyboard only.
Enable access via front keyboard.
Disable access via front keyboard.
Calibration 33