Yokogawa FieldMate - Manual (Page 4)

3
IM 01R01A01-91E 11th Edition : May 31, 2013-00
i) BRAIN DTM Install
When individually BRAIN DTM is installed, message windows may show up during installation.
Either pressing “Yes” or “No”, installation will be processed normally.
j) CD/DVD-ROM installer
If installation does not start automatically, double-click the following files.
FieldMate CD-ROM\FM\Setup.exe
Device files DVD-ROM\PRMFMDeviceFiles.exe *1
* 1 This is effective only when FieldMate is installed in your PC.
k) Adobe Reader
Adobe Reader of Adobe Systems Incorporated is required to view the user’s manual. If Adobe
Reader is not installed on the PC to be used, please download from home page of Adobe
Systems Incorporated.
FOUNDATION fieldbus H1 Communication
a) NI-FBUS Setting
Using the FOUNDATION fieldbus H1 communication function, define the NI-FBUS before use as
follows.
Device Address = Visitor
Device Type = Link Master: (“Basic” to be specified when the other Host exists)
Usage = NI-FBUS
b) FFusb Setting
Using the FOUNDATION fieldbus H1 communication function, define the FFusb before use as
follows.
Device Address = Visitor
c) Device Class Setting
The device may not appear on the Segment Viewer immediately after changing FOUNDATION
fieldbus H1 device class on Device Class Setting. It will take approximately 30 seconds to update
display.
DTM Works
a) DTM License
Some device DTM and COMM DTM specify the relevant Frame Application where they can
perform with the check function built-in.