Yokogawa EJA110E User Manual
Page 69
<9. General Specifications>
9-21
IM 01C25B01-01E
*9:
Also see ‘Ordering Instructions’.
*10: Applicable for M, H and V capsules of EJX110A with wetted parts material code S, and all the ranges of EJ130 and EJ440.
Applicable also for EJA110E with option code /HG.
*11: Not applicable for output signal code F.
*12: Applicable only for EJ310 M and A capsules whose upper range value is set as smaller than 53.3 kPa abs.
*13: Applicable for wetted parts material code S; process connection code 0 and 5; and installation code 8 and 9. Not applicable for
option code U1, N2, N3 and M11. Not applicable for EJ120.
*14: Applicable for wetted parts material code S.
*15: Material traceability certification, per EN 10204 3.1B.
*16: Applicable for Process connections code 0 and 5.
*17: Applicable for Process connections code 1, 2, 3, and 4.
*18: Applicable for EJA110E, Capsule code F and L of EJX110A, Capsule code B of EJ430 and EJX310A, and all the capsules of
EJX110A with wetted parts maerial code H, M, T, A, D, and B.
*19: Applicable for Capsule code M, H and V of EJX110A with wetted parts material code S.
*20: Applicable for Capsule code A of EJ430 and EJ310.
*21: Applicable for Capsule code H of EJ430.
*22: Applicable for EJ120 and Capsule code L and M of EJ310.
*23: Applicable for EJ130 and Capsule code C of EJ440.
*24: Applicable for Capsule code D of EJ440.
*25: Pure nitrogen gas is used for oil-prohibited use (Option code K1, K2, K5, and K6).
*26: Pure nitrogen gas or pure water is used for oil-prohibited use (Option code K1, K2, K5, and K6).
*27: Applicable only for output signal code -E and -J.
*28: The change of pressure fluctuation is monitored and then detects the impulse line blockage. See TI 01C25A31-01E for detailed
technical information required for using this function. The detection is for one side only.
*29: Applicable for EJA110E, Measurement span code M, H, and, V; and wetted parts material code S. The URL of static pressure range
is also extended to 25 MPa.