Yokogawa EJA110E - Manual (Page 84)

i
IM 01C25B01-01E
Revision Information
 Title : Differential Pressure and Pressure Transmitters
EJ110, EJ120, EJ130, EJ310, EJ430, and EJ440
 Manual No. : IM 01C25B01-01E
Edition Date Page Revised Item
1st Mar. 2004 — New publication
2nd Apr. 2004 — Revise words and phrases.
2-6 2.9.3 • Correct Ambient temperature –60 → –50
4-4 4.5 • Change the description of rotation angle.
8-3 8.4 • Add Allen wrench nominal 3mm to Table 8.4.1.
3rd Feb. 2005 — Re-number figure and table title.
i Add subsection 6.3.5.
ii Add note for Safety Transmitter.
1-1 1. • Add note for Fieldbus communication type.
1-3 1.1 • Add (f) Modification.
2-3 2.9 • Add NOTE for fieldbus communication type.
2-5 2.9.2 • Modify descriptions and instructions for CSA certification
2-7
2-8
2.9.3 • Correct number in Note 4. 10 MINUTES → 5 MINUTES
• Delete WARNING on non-incendive power supply.
• Correct number for Electrical data Ci. 6 nF → 10 nF
3-1 3. • Correct label of the switch in the figure. N → E, Y → D
• Add descriptions in Note 2.
4-3 4.4.1 • Add description about process connector in 3).
4-4 4.6 • Add section 4.6.
6-1 6.3.1, 6.3.2 • Add limitation/note when /AL is specified.
6-2 6.3.4 • Add limitation when /AL is specified.
6-2 6.3.5 • Add subsection 6.3.5.
7-3 7.2.1 • Add descriptions about zero adjustment.
9-1, 9-2 9.1 • Add notes for FOUNDATION fieldbus communication type.
• Add capsule code H.
9-4, 9-5 9.2 • Add output signal code -F and capsule code H.
9-6 9.3 • Add CSA approvals and note *2 and *3
9-8 9.4 • Add note *3.
9-10 9.4 • Add notes for /AL and FOUNDATION Fieldbus.
4th Sep. 2005 1-1 1. • Add model names to the manual coverage.
2-3 to 2-8 2. • Add applicable standard and certificate number for each
approval.
2-11 2.10 • Change australian reference standard.
2-11 2.11 • Add descriptions for PED.
2-12 2.11 • Add section 2.12.
4-1 4.1 • Add model name.
4-2 4.3 • Add table 4.1.
8-5 8.4.3 • Add table for torque.
Add notes for reassembling EJX130A and EJX440A.
8.4.4
• Add table for torque.
9-1 to 9-18 9. • Add specifications, codes, and dimensions for EJX130A,
EJX310A and EJX440A.
5th July 2006 2-8- 2.9.3 • Change applicable standards for ATEX type n.—
6th Nov. 2007 1-1 1. • Add model code table.
2-3 2.9 • Add note for EJX130A.
9-10 9.3 • Add note for EJX130A.
9-15 9.4 • Modify dimensions of EJX130A.
A-1 APPENDIX 1. Add "EJX130A ADDITIONAL INFORMATION."