Asus Motherboard A8N-SLI Premium - Manual (Page 143)

ASUS A8N-SLI Premium 5-25
TIP: For server systems, we recommend using a lower array block
size. For multimedia computer systems used mainly for audio and
video editing, we recommend a higher array block size for optimum
performance.
Take caution in using this option. All data on the RAID drives will be lost!
2. Press select the Striping
Block then press . The
following submenu appears:
If you selected Striping or Stripe Mirroring, use the up or down
arrow keys to select the stripe size for your RAID 0 array then press
.The available values range from 8 KB to 128 KB. The default
selection is 128 KB. The strip value should be chosen based on the
planned drive usage.
• 8 /16 KB - low disk usage
• 64 KB - typical disk usage
• 128 KB - performance disk usage
3.` Press to select the Free Disks area. Use the left or right arrow
keys to assign the array disks.
4. Press to create RAID set. The following message box appears.
Clear disk data?
[Y] YES [N] NO
5. Press to clear the selected disks or to proceed without
clearing the disks. The following screen appears.
8K ↑
16K
32K
64K
128K
Optim↓