Asus ME-99B - Manual (Page 63)

ASUS ME-99B User’s Manual 63
4. BIOS SETUP
4. BIOS SETUP
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to boot up after the power has
been interrupted. [Disabled] leaves your system off and [Enabled] boots up your sys-
tem. Configuration options: [Disabled] [Enabled]
PWR Up On Modem Act [Enabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer when
the modem receives a call while the computer is in Soft-off mode. NOTE: The computer
cannot receive or transmit data until the computer and applications are fully running,
thus connection cannot be made on the first try. Turning an external modem off and
then back on while the computer is off causes an initialization string that will also cause
the system to power on. Configuration options: [Disabled] [Enabled]
Wake On LAN [Disabled]
Wake-On-LAN allows your computer to be booted from another computer via a net-
work by sending a wake-up frame or signal. With this feature, network administrators
can remotely boot an entire network of computer systems during off-peak hours for
software updating or maintainance. Configuration options: [Disabled] [Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. Configuration options:
[Disabled] [Enabled]
4.5.1 Power Up Control
Power Up Control
IMPORTANT: This feature requires an optional network interface with Wake-
On-LAN and an ATX power supply with at least 720mA +5V standby power.