Watlow MINICHEF Timer Applications - Manual (Page 13)

A p p l i c a t i o n 2 5 Wa t l o w M I N I C H E F 2 0 0 0 ■ 1 1
Step 8 Operate the Controller
Summary of Key Functions in Operation Mode
Key Function
A Not Used
B Time
C Increment
D Pause
E Start/Stop
F Decrement
Startup
Apply power to the controller.
[`idle] will appear on the display.
If the Real Time Clock Display option is installed and [Setup] / [Cloc`] is set to
[``yes], the time of day will appear on the display.
Set the Timer
1. Press the Time key [TiNe1] and then the time value will appear on the display.
2. Press the Up-arrow or Down-arrow key until the value you want appears on the dis-
play.
3. Press the Time key again.
The timer has been set.
[`idle] will appear on the display.
Five Second Timeout
When using the Up-arrow or Down-arrow keys to change a value, if you do not press
any key for 5 seconds, the timer will automatically be set to the last value on the dis-
play and return to [`idle].
Run the Timer
1. Set the timer as shown above in “Set the Timer”.
2. To run the timer settings, press the Start/Stop key. The timer will countdown. When
the timer is running the Start/Stop key indicator light will be solid on. While the
timer is running, its time can be adjusted by pressing the Time key [TiNe1] and
using the Up-arrow or Down-arrow keys to adjust its value, in five-second intervals.
The Time key indicator light will flash while adjustments are being made. Changing
the value of the Time while the timer is running will not change the settings of the
timer as set in “Set the Timer”.