Proface APL3000B - Node Box PC - Manual (Page 25)

PS-3710A / PS-3711A Reference Manual
2-2
2.1 System Setup Screen Operation
This section describes the operation of the BIOS setup screen.
(1) Connect a USB or PS/2 keyboard to the PS-A.
(2) Turn the PS-A’s power ON.
(3) After the boot-up screen comes up, press the [F2] key. The setup utility starts and the following screen
appears.
(4) To use the [
I
] [
J
] arrow keys, change the menu contents. A setting screen of each system will be
displayed.
(5) To use the [
K
] [
L
] arrow keys, move up and down the cursor to select an item of the system, then con-
firm it by the [Enter] key.
(6) Change the value of the confirmed item with the [-] and [+] keys.
(7) To return from the sub layer to the main layer, press the [Esc] key.
• Normally, use only the factory (default) settings.
KEYBOARD ACTION KEYS
Provides a summary of the keyboard keys used to carry out the set-up.
SYSTEM SETTING SELECTION AREA
Each of the titles (areas) listed here contains system setting items.
Menu
Help area
Shows the information of
the items you selected.