Ross Controls STAINLESS STEEL SERIES 15 - Manual (Page 2)

A
B
C
Port Size Valve Model Avg. C
V
Dimensions inches (mm) Weight
In-Out Exh. Number* 1 to 2 2 to 3 A B C lb (kg)
1/4 1/4 1523A2004 2.14 2.08 3.5 (89.9) 8.6 (218.3) 2.1 (53.6) 3.75 (1.70)
3/8 1/2 1523A3004 5.79 6.24 4.3 (108.5) 10.5 (265.8) 1.8 (44.5) 6.0 (2.72)
1/2 1/2 1523A4004 5.79 6.24 4.3 (108.5) 10.5 (265.8) 1.8 (44.5) 6.0 (2.72)
3/4 1 1523A5004 14.30 17 6.0 (151.1) 14.1 (356.9) 2.5 (63.5) 13.0 (5.89)
1 1 1523A6004 14.30 17 6.0 (151.1) 14.1 (356.9) 2.5 (63.5) 13.0 (5.89)
11/2 2 1523A8004 39 45 8.2 (208) 18.5 (470) 4.0 (101) 35.0 (15.87)
2 2 1523A9004 39 45 8.2 (208) 18.5 (470) 4.0 (101) 35.0 (15.87)
O 3.0
L-O-X ® Stainless Steel Accessories
Port Construction Model Dimensions inches (mm) Weight
Size Number Threads* Length Width lb (kg)
1/4 Stainless Steel 5500A2004 Male 1.75 (44.5) 0.56 (14.2) 0.05 (0.23)
1/2 Stainless Steel 5500A4004 Male 2.75 (69.7) 0.87 (22.1) 0.25 ( 0.11)
1 Stainless Steel 5500A6004 Male 3.87 (98.3) 1.31 (33.3) 0.45 (0.20)
2 Nickel Plated 5500A9004 Male 5.50 (139.7) 2.37 (60.2) 1.50 (0.68)
2 © 2012, ROSS CONTROLS. All Rights Reserved.
• Constructed for very corrosive or sensitive situations of corrosion-resistant metals to withstand shock
• Available in different port sizes, offering continuous heavy-duty use under all types of conditions
• Recommended for general purpose air exhaust applications for pressures up to 125 psig (8.6 bar)
Silencers port sizes 1/4 thru 1 have all stainless steel construction.
Silencers port size 2 have standard construction consisting of nickel plated body and stainless internals.
All silencers are supplied with a standard pipe thread fitting for attaching directly to the exhaust ports
of air-operated equipment.
Stainless Steel Silencer
Stainless Steel
Silencers
STANDARD SPECIFICATIONS:
Ambient/Media Temperature: 30° to 175°F (-1° to 80°C).
Note: For lower temperature ratings, consult ROSS.
Flow Media: Filtered air.
Inlet Pressure: 0 to 300 psig (0 to 20.7 bar).
Port Threads: NPT, BSPP. For BSPP threads, add a “D” prefix
to the model number, e.g., D1523A2004.
Lock Hole Diameter:
Port sizes 1/4 thru 2: 0.34 inch (8.64 mm).
Length of Hole:
Port size 1/4: 0.44 in (11.17mm).
Port size 1/2: 0.47 in (11.93mm)
Port size 1 and 2: 0.55 inch (13.97 mm).
NOTE: Per specifications and regulations, these products are
defined as energy isolation devices
, NOT AS EMERGENCY STOP
DEVICES.
Model Inlet Port Verification Dimensions inches (mm) Weight
Number Size*
Option Length Width lb (kg)
1155H30 1/8 Visual Indicator 2.33 (59.3) 1.00 (25.4) 0.22 (0.1)
1162A30 1/8 Pressure Switch 8.20 (208.3) 1.25 (31.75) 0.23 (.01)
* NPT port threads.
Pneumatic Energy Release Verification Options
Visual Indicator
• 316 Stainless Steel Body, Internals and Springs
• Nitrile Seals • Visual Indicator piston Acetal
• Visual Indicator assembly Acetal with acrylic lens
A
Port
B
Pin Configuration
Pin 1
COM
Pin 2
NC
Pin 3
NO
Pin 5
NC
Pin 4
COM
Pin 6
NO
2 All Red
3 Green
5 Red/Black
6 Red/Blue
1 Red/White
Circuit 1
4 Red/Yellow
Circuit 2
6.0 (152.4) 1.6 (40.7)
Max. 1.13 (28.7) 0.6
(15.3)
1/8-27
NPTF
0.6
(15.3)
1.0 (25.4) HEX
Pressure Switch
• 316 Stainless Steel Body • Nitrile Seals
• DPDT (Double-Pole Double-Throw Switch
• Factory preset 5 psi (falling)