Ross Controls INTEGRATED FILTER_REGULATOR PLUS LUBRICATOR - Manual

62 © 2012, ROSS CONTROLS.
All Rights Reserved.
BANTAM Modular FRLs
Integrated Filter/Regulator plus Lubricator
FEATURES:
• Filter and regulator consolidated in a single assembly;
wick-feed lubricator
• Modular assembly and mounting
• Threaded ports or quick-connect fittings for tubing up
to 10 mm in diameter
• 5-micron rated polyethylene filter element
• High-strength polycarbonate plastic bowls
or
aluminum bowls
• Internal automatic filter drain; optional manual drain
• Piston-type regulator or diaphragm-type
• Self-relieving regulator; optional non-relieving
• Pressure gauge
Ports: 1/8 & 1/4 and Tube Fittings
Flow to 23 scfm
A
C
B
0
B A R 1 0 0 x k Pa p s i
120
160
20 0
80
4 0
0
2
4 6 8
10
12
14
Port DIMENSIONS inches (mm) Weight
Size A B C Depth † lb (kg)
1/8, 1/4 4.6 (117) 3.6 (92) 2.6 (67) 1.8 (45) 0.57 (0.32)
Models below have quick-connect fittings for tubing.
1/4 5.0 (127) 3.6 (92) 2.6 (67) 1.8 (45) 0.55 (0.31)
3/8 5.6 (142) 3.6 (92) 2.6 (67) 1.8 (45) 0.55 (0.31)
4 mm 5.1 (130) 3.6 (92) 2.6 (67) 1.8 (45) 0.55 (0.31)
6 mm 5.1 (130) 3.6 (92) 2.6 (67) 1.8 (45) 0.55 (0.31)
8 mm 4.7 (120) 3.6 (92) 2.6 (67) 1.8 (45) 0.55 (0.31)
10 mm 5.6 (142) 3.6 (92) 2.6 (67) 1.8 (45) 0.55 (0.31)
† Less gauge.
STANDARD SPECIFICATIONS (for products on this page):
Ambient/Media Temperature:
With polycarbonate plastic bowl: 40° to 125°F (4° to 52°C).
Metal bowls: 40° to 175°F (4° to 79°C).
Bowls: 2-ounce (60-ml) capacity polycarbonate plastic bowls or
aluminum bowls.
Filter Drain: Internal automatic drain; optional manual drain.
Filter Element: 5-micron rated polyethylene.
Filter/Regulator & Lubricator Bodies: Acetal.
Fluid Media: Compressed air.
Pressure Gauge: 0 to 160 psig (11 bar);
1/8 NPT gauge ports front and rear. Inlet Pressure:
For automatic drain model:
With polycarbonate plastic bowl: 15 to 150 psig (1.0 to 10.3 bar).
With metal bowl: 15 to 200 psig (1.0 to 13.8 bar).
For manual drain model:
With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar).
With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Oil Adjustment: External, no shutoff.
Outlet Pressure: Adjustable up to 100 psig (6.9 bar).
Panel Mounting: 1-3/16 inch (30 mm) hole required.
Regulator Dome and Knob: Acetal.
Seals: Nitrile.
Threads: NPT standard, BSPP. For BSPP threads, add a “C” prefix
to the model number, e.g., C5D01C0115.
Change the ninth digit to “7” for quick fill lubricator cap e.g., 5D01C0117.
For diaphragm type regulator, change eighth digit to “2”, e.g., 5D01C0125.
THREADED
1/8 5D01C0115 5D01C0216 5D01C0315 5D01C0416
1/4 5D02C0115 5D02C0216 5D02C0315 5D02C0416
TUBE FITTINGS
1/4 5D03C0115 5D03C0216 5D03C0315 5D03C0416
3/8 5D04C0115 5D04C0216 5D04C0315 5D04C0416
4mm 5D05C0115 5D05C0216 5D05C0315 5D05C0416
6mm 5D06C0115 5D06C0216 5D06C0315 5D06C0416
8mm 5D07C0115 5D07C0216 5D07C0315 5D07C0416
10mm 5D08C0115 5D08C0216 5D08C0315 5D08C0416
Port Automatic Drain Models Manual Drain Models
Size Plastic Bowl Metal Bowl Plastic Bowl Metal Bowl
PISTON TYPE
REPLACEMENT FILTER ELEMENT KIT
Element Rating/Type Kit Number
0.5 µm polyethylene (Std element) 933K77
AIR FLOW DATA
See Flow Charts for individual assembly
components on preceding pages.
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
ISO Symbol
FRL
Automatic Drain
Self-relieving
2
1