beautypg.com

Roller bracket kit customer assembly guide – Reelcraft Series 30000 Hose Reels ROLLER BRACKET KIT User Manual

Page 2

background image

30000 SERIES HOSE REELS

ROLLER BRACKET KIT
CUSTOMER ASSEMBLY GUIDE

1.

Slip Guide Arm (1) over the three mounting screws (2) as shown
and rotate into desired position. (See Guide Arm Attachment).

2.

Tighten screws.

3.

Repeat for opposite side, being sure that shafts (3) fit into posts (4)
on other side (for 28" models only). For models other than 28",
perform steps 1 & 2 for both sides. Then fix guide rollers and posts
to reel as shown in step 1.

4.

Replace swivel (5), being sure to apply thread sealant before
reassembly.

5.

If required, feed hose through rollers.

4.

Assemble Roller Bracket Kit To Reel

2.

Replace these bolts with 3/4" long screws (3) included in kit.

3.

Do not tighten yet.

4.

Repeat steps 1 through 3 for opposite side.

3.

(Continued)

2

2.

Rotate guide arm into desired position. Tighten screws.

*The addition of a roller guide system is not recommended on reels equipped with a chain guard. An addition may void

Reelcraft Warranty. Consult factory for details.

1.

Line up holes in guide arm with screw heads and push
guide arm flush with side frame.

GUIDE ARM ATTACHMENT

Reelcraft Industries, Inc. • (800) 444-3134 / (260) 248-8188 • Fax: (260) 248-2605

E-mail: [email protected] • Internet: www.reelcraft.com

2

1

5

4

3