beautypg.com

Ramsey Winch RPH-50000 LARGE FLANGE W/AIR TENSIONER (OBSOLETE) User Manual

Page 18

background image

15

6.

Center the tensioner bar between the drum flanges. Loosen (do not remove) the mounting bolts
and center with a scale or tape measure. Tighten the mounting bolts to 60-70 ft-lbs. torque.

7.

Reconnect the air supply to the “T” fitting (item #10) on the cable tensioner. Do not tighten more
than 1/4 turn beyond hand tight. If the cable was removed, do not energize the cable tensioner
until the cable is installed. See the instructions on page 6.