Dis-assembly – Ramsey Winch HDG-350 (JERR-DAN) (NOT CURRENT) User Manual

Page 11

Text mode
Original mode

1. Drain oil from gear housing by

removing (item #48)plug from
bottom of gear housing.
Remove plug (Item #47) from
top of gear housing. Remove
adapter rod (item #38) by
driving pin (item #49) from
shifter shaft of winch. Remove
mounting frame (item #1)
from winch by removing hard-
ware shown.

2. Remove clutch housing (item #14) and

clutch (item #6) from winch assembly.

Remove two keys (item #43) from key-
ways. A screwdriver can be used, at
notch, to aid in the removal of keys.
Once keys have been removed, drum
(item #10) and thrust washer (item
#62) can be removed from drum shaft.

INSTRUCTIONS FOR OVERHAUL OF RAMSEY
MODEL HDG-350 RAM-LOK

DIS-ASSEMBLY