Ramsey Winch RPH 10000T - Manual (Page 10)

8
INSTRUCTIONS FOR OVERHAUL OF RAMSEY WINCH
MODEL RPH-10,000T
DISASSEMBLY
Remove breather plug and reducer (item #34 & #39) from winch. Drain oil from winch by removing
plug (item #40). Remove motor (item #35), coupling (item #31) from winch by unscrewing
capscrews (item #24). If coupling is being replaced, be sure spirol pin is installed. Tap motor lightly
to disengage. Replace all o-rings and seals with new ones during re-assembly (order kit #246042).
If necessary, remove valve (item #49) from motor by removing capscrews (item #21) and
lockwashers (item #51).