Ramsey Winch FORD WRAPAROUND KIT 295356 (RPH 12000) - Manual (Page 3)

2
STEP 2
Remove (4) bumper bracket bolts from each side of bumper. This allows bumper to move forward to
provide access to lower bracket bolts. Use (3) 1/2-13NC x 1-1/2 lg. capscrews #13, with lockwashers
#21 through bottom of vehicle frame and into nut plate attached to bracket assemblies, each side.
Tighten hardware to full torque. (See torque value chart, page 6).
Reattach bumper to bumper brackets and tighten all hardware to full torque. Use bracket assembly
#7 & #8 as a template to drill (2) 9/16 DIA. holes through bumper brackets, as shown below. Install
(2) 1/2-13NC x 1-1/2lg. capscrews #13, with lockwashers #21, nuts #19 and nut strips #1, each side.
Reattach vehicle tow hooks to underside of bracket assembly #7 & #8 using M12 x 1.75 x 50mm
capscrews. Discard the existing bolts. Tighten to full torque. (See torque value chart, page 6).
Reattach splashguard.