Ramsey Winch CHEVY GRILL GUARD KIT 295358 (RE WINCH) - Manual (Page 4)

KI-913357-1002-C 3
Step 7
Install upper tube assembly #3 between side plates #1.
Insert (1) shim #26 between tube and side plate at each
end. Secure using (1) 3/8-16NC x 3/4” hex socket button
head capscrew #15 through side plate and into threaded
hole in each end of tube (Figure 6). Repeat for other tube.
TIGHTEN ALL HARDWARE COMPLETELY. Start at the upper tube
assembly and work down to the lower bracket assemblies
tightening all hardware to the appropriate torque value.
(See
Torque Value Chart on page 5).
Step 8
Install fairlead as shown below. Note that top holes in channel (Figure 7) align with bottom holes on
roller fairlead. Secure using capscrews, lockwashers, and nuts furnished with winch.
Figure 7
Figure 6