Ramsey Winch SILVERADO/SIERRA 2500HD/3500 295952 - Manual (Page 2)

1
Note: It is not necessary to remove the vehicle bumper to install this mounting kit.
Step 1
Remove tow hook and set aside (Figure 1). Tow hook and hardware will be reused.
Figure 1
Step 2
Cut around tow hook opening to allow the lower frame mounting bracket (Item #5) to pass through.
(Figure 2)
Figure 2
Step 3
Install lower frame mounting bracket (Item #5) using a ½” t-bolt (Item #12), ½” flat washer (Item # 20),
and ½” locknut (Item #18). (Figure 3) Attach nut loosely.
Note: The t-bolt (Item #12) is installed from inside of the frame down through rear hole of the lower frame
mounting bracket (Item #5).
Figure 3
REAR HOLE OF LOWER
FRAME BRACKET