Ramsey Winch FORD WRAPAROUND KIT 295918 - Manual (Page 3)

KI-913348-0301-B 2
Step 3
Relocate the accessory plug from the inside of the L.H. vehicle frame to the outside using the
existing mounting holes. The accessory plug is shown in the factory installed position (Figure 4).
Note the relocated position on the outside of the vehicle frame (Figure 5).
Place spacer #9 (Figure 5) between frame and L.H. bracket assembly #7 (Figure 6).
Step 4
Place L.H. bracket assembly #7 over inside and bottom of frame (Figure 6). Secure brackets to
frame using (1) 9/16-12NC x 4-1/4 lg. capscrew #16 through spacer #9, vehicle frame, second
spacer #9, and secure with locknut #19. (Figure 7).
ACCESSORY PLUG
Figure 5
Figure 4
ACCESSORY PLUG IN NEW LOCATION
Figure 6
Figure 7