Ramsey Winch FORD GRILL GUARD/WRAPAROUND KITS 295344 & 295345 (RE WINCH) - Manual (Page 5)

STEP 2
4
Remove shipping strap and mounting bolts from winch assembly and discard. Place frame assembly
(item #5) over top of winch and secure. Use (3) 3/8-16NC x 1" lg. hx.hd. capscrews with lockwashers
and (1) 3/8-16NC x 3/4 lg. soc.hd. capscrew with high collar lockwasher (9/16 O.D.) to attach winch
to rear angle of frame assembly DO NOT TIGHTEN.
Attach winch to front channel of frame assembly, using (3) 3/8-16NC x 1 lg. soc.hd. capscrews with
high collar lockwashers (9/16 O.D.) and (1) 3/8-16NC x 3/4 lg. soc.hd. capscrew with high collar
lockwasher (9/16 O.D.), as shown below. NOTE: The (2) outer-most capscrews are inserted through
holes in face of channel and threaded into winch. The (2) inner-most holes are placed through
channel at fairlead opening and threaded into winch. Tighten front hardware to proper torque
value then tighten back hardware (see TORQUE VALUE CHART). Snap hole plugs (item #31) into
outer-most holes in front of frame assembly.