Ramsey Winch DODGE GRILL GUARD/WRAPAROUND KITS 295938 & 295939 - Manual (Page 5)

If installing Grille Guard only, skip steps 8-10.
8. Remove 3/8” bolt that attaches Center Unit to Upper Mounting
Bracket.
9. Install Wrap Around Right and Left units (Items #2 and #3) to
side plates of Center Unit using (2 per side) 1/4” x 1” cap-
screws (Item #11) and lock nuts (Item #14) with gaskets
(Item #19) and washers (Item #18). Re-install 3/8” capscrew
and locknut through Upper Mounting Bracket, side plate of
Center Section Assembly, and Wrap Around units.
10. Install Headlight Grille Right and Left units (Item #4 and #5) to
Wrap Around units and side plates of Center unit using (2) 1/4”
x 1-1/4” capscrews (Item #11), and lock nuts (Item #14) with
washers (Item #18). Far end of Headlight Grille units will snap
into Wrap Around units.
5