Ramsey Winch DODGE GRILL GUARD/WRAPAROUND KITS 295938 & 295939 User Manual

Page 3

It is a good idea to install the mounting bracket assembly
entirely on one side, then start on the other. Install bolts
loosely—do not tighten until told to do so.

2. Loosen and remove factory bolt assembly nuts. Figure at

right is view from under vehicle looking up at frame. The
bolt assembly points away from vehicle frame.

3. If vehicle is diesel, push oil cooler up to access factory

bolt assembly. Remove factory bolt assembly and rein-
stall with lower mounting brackets (Item #8). Figure at
right is view from under vehicle looking up.

Lower mounting brackets should fit snuggly through
notches in airdam.

Bumper

Bracket Bolt

Bumper

Oil Cooler

Lower Mounting

Bracket

Factory Bolt

Assembly

4. To mount the Upper Mounting Bracket (Item #10),

remove the nut from the upper factory Bumper
Bracket bolt. Attach the Upper Mounting Bracket to
the Bumper Bracket bolt and tighten the nut back
on. Figure at left is view from above vehicle looking
down.