Ramsey Winch CHEVY WRAPAROUND KIT 295922 - Manual (Page 3)

2
Step 3
Drill 17/32” hole in vehicle frame using rear hole in frame mounting bracket as a template (Figure 6).
Install ½” nut #22 through existing access hole in bottom of vehicle frame (Figure 7). Using a
standard combination wrench to hold the nut in place, thread (1) ½-13NC X 1-1/4” capscrew #19 into
nut (Figure 8).
DO NOT TIGHTEN HARDWARE COMPLETELY.
Figure 6 Figure 7 Figure 8