Ramsey Winch RPH-8000 - Manual (Page 10)

INSTRUCTIONS FOR OVERHAUL OF RAMSEY WINCH
MODEL RPH 8,000
Remove breather plug and reducer (item #34 and #39) from winch. Drain oil from winch by
removing plug (item #40). Remove motor (item #35), coupling (item #31) from winch by
unscrewing capscrews (item #24). If coupling is being replaced, be sure pin (item #41) is
installed. Tap motor lightly to disengage. Replace all o-rings and seals with new one during re-
assembly (order kit #246042). If necessary, remove valve (item #49) from motor by removing
lockwashers (item #52) and capscrews (item #21).
8