Ramsey Winch RPH-30000 - Manual (Page 8)

3. Remove brake assembly screws (item #48) from brake (item #33a) to access mounting screws (item #20)
attaching brake adapter plate (item #33d) to end bearing (item #9). Caution: Brake is spring loaded by
clutch spring and must be restrained against end bearing as mounting screws are removed. Remove cou-
pling (item #7) and gasket (item #33e) from the end bearing. Take note of the mounting configuration for
proper mounting of parts during re-assembly.
6
9
7
48
33c
31
33a
33e
33d
33e
20
20
48