Ramsey Winch RPH-25000 QUANTUM W/2-SPD MOTOR - Manual (Page 14)

11
12. With pin (item #44) installed in coupling, slide coupling (item #5) over end of input shaft below.
Slide coupling over end of shaft (item #12). Place gasket (Item #34) into position on motor
mounting surface of end bearing (item #8). Insert brake shaft into coupling. Use (2) screws (item
#21) to attach brake assembly to motor end bearing. Torque capscrews to 85 ft lbs each.
13. Attach motor (item #38) with well oiled gasket (item #33) to brake (item #32). Use (2) capscrews
(item #20) and torque to 74 ft. lbs. each. Securely connect hose (item #47) to elbow (item #30), in
valve (item #48), and brake (item #30).
34
8
10
5
21
31
47
BLEEDER
33
30
48
32
19
19
38
FITTING