Ramsey Winch RPH-25000 QUANTUM GBX - Manual (Page 4)

1
Weight (without wire rope and tensioner).....................................380 lb. (172,0 Kg)
Gear Reduction.................................................................................................25.53:1
(Kg)..........................................................................................................11,340
Rated Line Pull (lb.)...........................................................................................25,000
LAYER OF CABLE
9,5
9,430
20,800
of .56" dia. Extra Improved Plow Steel or equivalent.
* These specifications are based on recommended wire rope
per layer
(at 15 GPM)
*Cable capacity
*Line speed
*Rated line pull
Kg.
Lbs.
FPM
MPM
M.
Ft.
22 10
8,3
27 31
11,340
25,000
35 75
7,070
15,600
56
185
11,8
41
38
11,1
36
8,110
17,900
125
74
14,0
46
245
6,300
13,900
5 4 3 2 1
RAMSEY HYDRAULIC PLANETARY WINCH MODEL RPH 25,000
PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most efficient operation from your Ramsey Winch, and safety
procedures one needs to know before operating a Ramsey Winch. Do not operate this winch until you have carefully
read and understand the "WARNINGS" and "OPERATION" sections of this manual.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications. Great care and skill go into every winch we make.
If the need should arise, warranty procedure is outlined on the back of your self-addressed postage paid warranty card.
Please read and fill out the enclosed warranty card and send it to Ramsey Winch Company. If you have any problems
with our winch, please follow instructions for prompt service on all warranty claims. Refer to back page for limited
warranty.
SPECIFICATIONS*
NOTE: The rated line pulls shown are for the winch only. Consult the wire rope manufacturer for wire rope ratings.
WARNINGS:
CLUTCH MUST BE TOTALLY ENGAGED BEFORE STARTING THE WINCHING OPERATION.
DO NOT START WINCH MOTOR BEFORE ENGAGING CLUTCH.
DO NOT DISENGAGE CLUTCH UNDER LOAD.
STAY OUT FROM UNDER AND AWAY FROM RAISED LOADS.
STAND CLEAR OF CABLE WHILE PULLING. DO NOT TRY TO GUIDE CABLE.
DO NOT EXCEED MAXIMUM LINE PULL RATINGS SHOWN IN TABLE.
DO NOT USE WINCH TO LIFT, SUPPORT, OR OTHERWISE TRANSPORT PEOPLE.
A MINIMUM OF 5 WRAPS OF CABLE AROUND THE DRUM BARREL IS NECESSARY TO HOLD THE LOAD.
CABLE ANCHOR IS NOT DESIGNED TO HOLD LOAD.