Ramsey Winch HD-P8000 914178-0209 - Manual (Page 13)

11
Set winch with gear housing end down on work surface.
Install well-oiled o-rings and backup rings into grooves on outside of brake piston and backup brake piston as shown
in cross-section A-A below.
Piston, backup piston, brake discs and stators must be clean and free of grease and oil.
Insert brake discs (item #4) and stators (item #3) into gear end alternating, with stators first and last.
Insert backup brake piston (item #6) into motor end and insert brake piston (item #5) into it. Apply even pressure
on piston when installing.
Install retaining rings (items #39 & 46) into grooves in motor end housing.
4
3
32
30
6
28
33
29
31
5
39
46
A
A
SECTION A-A
5 6
31 29 30 32
28
33
MOTOR SIDE
DRUM SIDE