Ramsey Winch HD-P8000 FOR NRC - Manual (Page 13)

Set winch with gear housing end down on work surface.
Install well-oiled o-rings and backup rings into grooves on outside of brake piston and backup brake piston as
shown in cross-section A-A below.
Piston, backup piston, brake discs and stators must be clean and free of grease and oil.
Insert brake discs (item #4) and stators (item #3) into gear end alternating, with stators first and last.
Insert backup brake piston (item #6) into motor end and insert brake piston (item #5) into it. Apply even pressure
on piston when installing.
Install retaining rings (items #39 & 46) into grooves in motor end housing.
11
DRUM SIDE
MOTOR SIDE
33
28
32 30 29 31
6 5
SECTION A-A
A
A
4
3
32
30
6
28
33
29
31
5
39
46