Ramsey Winch HD-P40000 W/TNR & 2 SPEED MOTOR - Manual (Page 8)

6 914243-0711-D
31
42
15
31
5
18
3. Remove (12) capscrews #18 to remove gear housing cover and gasket from ring gear. Remove input thrust washer,
sun gear and input carrier assembly from inside ring gear. Remove ring gear and gasket. Remove output carrier as-
sembly. Inspect gear housing cover bushing #15 for damage or wear. Replace if damaged or excessive wear.
4. Remove (8) capscrews #20 to remove clutch retainer plate #10 from clutch piston. Remove clutch #9.
9
10
20