Warnings – Ramsey Winch HD-P40000 W/TNR & 2 SPEED MOTOR User Manual
Page 3
1
RAMSEY HYDRAULIC PLANETARY WINCH MODEL HD-P40,000
PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most efficient operation from your Ramsey Winch, and
safety procedures one needs to know before operating a Ramsey Winch. Do not operate this winch until
you have carefully read and understand the "WARNINGS" and "OPERATION" sections of this manual.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications. Great care and skill go into every winch
we make. If the need should arise, warranty procedure is outlined on the back of your self-addressed post-
age paid warranty card. Please read and fill out the enclosed warranty card and send it to Ramsey Winch
Company. If you have any problems with our winch, please follow instructions for prompt service on all war-
ranty claims. Refer to back page for limited warranty.
NOTE: The rated line
pulls shown are for
the winch only. Consult the wire rope manufacturer for wire rope
ratings.
WARNINGS:
CLUTCH MUST BE TOTALLY ENGAGED BEFORE STARTING THE WINCHING OPERATION.
DO NOT START WINCH MOTOR BEFORE ENGAGING CLUTCH.
DO NOT DISENGAGE CLUTCH UNDER LOAD.
STAY OUT FROM UNDER AND AWAY FROM RAISED LOADS.
STAND CLEAR OF CABLE WHILE PULLING. DO NOT TRY TO GUIDE CABLE.
DO NOT EXCEED MAXIMUM LINE PULL RATINGS SHOWN IN TABLE.
DO NOT USE WINCH TO LIFT, SUPPORT, OR OTHERWISE TRANSPORT PEOPLE.
A MINIMUM OF 5 WRAPS OF CABLE AROUND THE DRUM BARREL IS NECESSARY TO HOLD THE LOAD.
Weight (without cable)...............................................740 lb. (336.36 Kgs.)
Rated Line Pull (lbs.).........................................................................40,000
15,100
6.1
33,500
Gear Reduction................................................................................51.35:1
dia. EIPS cable and 9.6 cu.in./Rev. motor.
* These specifications are based on recommended wire rope of .75 inch
(Kgs.)..............................................................................18,100
1
2
LAYER OF CABLE
*Line speed
*Cable capacity
(at 20 GPM)
per layer
*Rated line pull
FPM
Kg.
Lbs.
MPM
M.
Ft.
7
16
5.2
17
20
18,100
40,000
25
55
3
4
5
6
9,200
33
20,300
71
235
10.1
11,400
41
27
25,300
135
8.2
28
23
7.0
13,000
28,800
95
56
30
9.1
10,200
22,500
185