Ramsey Winch HDP35000 - Plantetary Industrial Winch - Manual (Page 14)

7. Remove clutch housing #23 with piston #16 and clutch #3 inside from gear
box assembly #32. Inspect clutch for wear or damage and replace if re-
quired. Remove clutch #3 from piston by removing retainer ring #27. To
remove piston from clutch housing apply air to 1/8” port on bottom of clutch
housing. Remove O-rings #24 from grooves on piston and clutch housing
and inspect for damage or wear. Inspect gear box assembly #32 for damage
or wear. Replace complete gear box assembly if gears are damaged.
3
16
23
24
24
32
27
32a
32a
11