Ramsey Winch HDP35000 - Plantetary Industrial Winch - Manual (Page 12)

5. If splines inside drum driver #102 are damaged, drum driver must be replaced.
Remove drum driver by unscrewing (8) capscrews #105. If bushings show signs of
wear, replace by pressing old bushings from drum #101 and removing O-rings from
grooves in drum and drum driver #102. Place well-oiled O-rings #107 into driver
and #109 into drum. Place well-oiled O-ring #108 in groove on outside of driver
#102. Press bushings #104 into drum driver until fl ange is fl ush and #103 is fl ush
against drum.
103
109
106
101
108
102
107
104
105
9