Ramsey Winch HD-P10000 - Manual (Page 13)

Set winch with gear housing end down on work surface.
Install well-oiled o-rings and backup rings into grooves on outside of brake piston and backup brake piston as shown
in cross-section A-A below.
Piston, backup piston, brake discs and stators must be clean and free of grease and oil.
Insert brake discs (item #5) and stators (item #4) into gear end alternating, with stators first and last.
Insert backup brake piston (item #7) into motor end and insert brake piston (item #6) into it. Apply even pressure
on piston when installing.
Install retaining rings (items #42 and 49) into grooves in motor end housing.
11
5
4
35
33
7
31
36
32
34
6
42
49
A
A
SECTION A-A
6 7
34 32 33 35
31
36
MOTOR SIDE
DRUM SIDE